A few weeks ago, we received many comments requesting information on stitching on knits. Well, knits is a pretty large category! So I’ll give you some general guidelines on stabilizing t-shirt knits.
Eliminate the Stretch
The number one goal of hooping and stabilizing knits is to eliminate the stretch during the embroidery process. My favorite stabilizer for knits is a permanent cut-away, polymesh stabilizer. Polymesh is strong, translucent and comfortable next to the skin. Since it’s a cut-away, its permanent properties will provide stability to the embroidery throughout the life of the knit fabric. This is an important feature since knit fabrics are not as durable as wovens.
I prefer to adhere the polymesh to the knit by using a temporary spray adhesive or selecting a fusible polymesh. Cut the stabilizer large enough to extend beyond the hoop’s dimensions. Hoop the knit with the stabilizer firmly fused or adhered to the design area. When you run your finger along the knit fabric, it should not separate from the polymesh. If it does, take the time to fuse it properly.
Toppers help keep the edges of an embroidery design crisp. Use a lightweight water soluble stabilizer that will be easy to remove.
Heavy, dense embroidery designs will appear to be ‘bullet proof’ on most knit fabrics. Test your embroidery design on a similar knit fabric and give it this test. Roll the embroidered knit fabric onto itself, jellyroll style. If the embroidery appears stiff and boxy, the design is too dense. Reduce the density in embroidery software.
Proper underlay is key to beautiful embroidery on knit fabrics. Inadequate underlay will not provide the foundation required for the stretchy knit fibers. Don’t skimp on underlay to reduce the stitch count. Instead, adjust the density of the fill stitches to space the stitches further apart resulting in less stitches.
Delicate running stitch outlines can sink into knits so avoid these fragile stitches if possible.
When stitching on knits, I like to use caution and set up as many safety nets as possible. Hoop the entire knit fabric in a standard hoop, Magna-Hoop or Snap-Hoop. Use the machine’s basting feature and add a topper. Stitch the design in polyester thread (as most knits launder easily, polyester thread is colorfast and very durable).
After the embroidery is complete, remove the basting stitches from the back. The stabilizer will protect the knit from the seam ripper. If you used a fusible polymesh, press the fabric from the wrong side to reactive the adhesive. Gently release and trim the excess polymesh from the fabric. Leave at least ½” stabilizer around the embroidery. Press the stabilizer from the back to adhere it again to the fabric. Let cool.
We love embroidering on blanks! There’s always the last minute gifts needed for baby showers, house warming gifts, hostess gifts or birthdays. Nothing is easier or more heartfelt than stitching a blank for someone special. Let’s be honest– no one needs to know it didn’t take you hours to stitch! We want to know what your favorite embroidery blanks are. How do you jazz them up and make them extra special?
Leave a comment on the above topic and you’ll be entered into our drawing to win Contemporary Machine-Embroidered Fashions!
Last week we asked…Who do you know in your life that would do cartwheels to have a machine? What would they make? The winner of the $25.00 coupon on www.dzgns.com is…Danyl!
“My daughters would love to have a machine so that they could make anything they wanted. Right now they have to share mine and are only allowed to use it with my supervision.”