Search here...
TOP
Embroidery Tips & Techniques Hooping Uncategorized

How to Apply Centering Guides on Snap Hoop Monster

 

With PAL

If you have Perfect Alignment Laser (PAL), turn on PAL and align the beams with a cutting mat or the DIME hoop mat.

Place the hoop under PAL. Align the stitched crosshair with the laser beam.

Remove the protective paper from the wrong side of the guides. Place the guides on the frame, centering the zero on each beam.

Firmly press the guides to the frame. Trim the excess off the ends. Done!

For Janome M17: Align the Adhesive Placement Guide’s “0” with the beam. Trim the guide to fit witin the notches on the hoop.

 

Without PAL

Use a ruler to extend each leg of the stitched crosshair to the frame.

Remove the protective paper from the wrong side of the guide. Place the guide’s zero mark at the extended crosshair.

Firmly press the guides to the frame. Trim the excess off the ends. Done!

(For Janome M17: Align the Adhesive Placement Guide’s “0” with the marked line on the stabilizer. Trim the guide to fit within the notches on the hoop.)


NOTE – The zero indicates the center of the hoops sewing field, not the center of the Snap Hoop Monster frame. When the placement guides are applied in this fashion, all designs will land in the center of the sewing field.

Related posts:

«

»

25 COMMENTS

  • Colleen

    What a great idea! Thank you. I have been using mine for years and have just never found the time to put the rulers on – you know – using it always takes precedent! Now is a great time! Okay, so now I have to remember between now and going upstairs to my sewing room. A lot can happen between now and then. Keep healthy and thank you for all the wonderful products. Hope this season spurs your creativity!

    • eileenroche
      AUTHOR

      Thank you for your kind words, Colleen. Hope you’ll join me on Facebook Live tomorrow!

  • Lynda

    I sorta messed up trying to apply the rulers – are are replacements available?
    Love my hooping mat.

    • eileenroche
      AUTHOR

      Hi Lynda, Replacement rulers are available for purchase. Please reach out to [email protected] or call 1-888-739-0555.

  • Maria

    Are replacements in inches? Thank you!

  • eileenroche
    AUTHOR

    Hi Maria,
    Replacement rulers in inches are available by request. Please reach out to [email protected] or call 1-888-739-0555.

  • Sherrie Lilly

    I don’t have the Monster Hoop but have several of the other Snap Hoops. I notice that after years of use the rulers are starting to decay. Where can I get replacement rulers? I have even looked on your shop site and they are not available there.

  • eileenroche
    AUTHOR

    Sherrie,

    The rulers are not on the website as they are replacement parts. Please reach out to [email protected] or call 1-888-739-0555 on how to order.

  • Linda

    Where are the crosshair downloads for the 8 x 8 and 9.5 x 14 hoops?

    • Debbie Vance

      You can use the 4×4 file for the 8×8 hoop and you can use the 6×10 file for the 9.5×14 hoop.

    • Victoria Brumfield

      i also need the crosshair download for the 9,5×14 hoop the other didnt line up right

  • Debbie Vance

    Thanks for this post and for providing the crosshairs files! I’ve had an 8×8 Snap Hoop for awhile and just recently bought the 4×4 and 9.5×14 Snap Hoops but hadn’t gotten around to attaching the rulers, thinking it would be a hassle. After seeing your blog and crosshair files I got all three hoops very quickly!

  • Marianne

    I’ve purchased and received the 5×7 magnetic snap hoop for Janome 500e. The crosshairs sewed slightly to the left of centre, though the pictures on the paper guide and on here all look like it’s intentional. Is that correct?

  • Dianne W

    Hi, I purchased the monster hoop 9.5″x14″ and I cannot find the Crosshairs downloads. Can you tell me where to locate it?
    Thank you,
    Diane

  • Donna Smith

    Help, I cant find how or where to download the crosshairs design
    Donna

  • Thread Trails

    I just purchased the 9 1/2 x 14 snap hoop for my Baby Lock Destiny 2 and I when I went to http://www.dzgns.com to download the crosshair design there was not one for that size. Please advise.

  • Laura Grotenhuis

    I have just gotten the monster hoop for the Janome 5×7.
    Which crosshairs do I use to apply the rulers to my hoop. There is only 4×4 and 6×10. I am concerned that the 6×10 might try to stitch on the frame itself.

  • Marcella

    Where is the crosshair design? I have the 5×7 and 8×8 hoop for the Pr1000

  • Dianne Page

    hi,
    Ive just sewed the cross hatch for my machine, its a Janome 500E. When placing the rulers in place, the horizontal line appears not to be in the centre of the hoop, Is this correct. the measurements as you look it. Hoop attachment to Machine.
    vertical left side 1770mm to of crosshair 1780 bottom. right side 1810mm to of crosshair 1750 bottom.
    Horizontal measurements left side of centre 1200mm right side of crosshair 1050mm.

    This seems a lot of indiscretion in my opinion or am I not doing something right.

    I’d appreciate your help.

    Dianne

  • Cindy Alexander

    Hello, I just got a 8×12 Snap Hoop Monster, where would I find the cross hair hatch so I can apply the rulers?
    Thank You!

  • Barbara Roy

    I have a Stellaire. How do I get this program on my computer to put on a thumb drive so I can put on machine

  • CHERYL R

    Eileen, HELP!!! where is the crosshairs file? I’m set up and ready to stitch

  • Jude Messner

    Hell-o Eileen, I purchased the 9.5X14 SNAP monster hoop. Can you direct me to the crosshairs file?
    I also signed up for your blog.
    I see you have a magazine as well? Where can I find out more about it?
    Thank you!

Pingback: Tips & Tricks for Magnetic Hoops – Eileen's Machine Embroidery Blog on March 31, 2020

Pingback: Happy Hoopapalooza!  A Guide to Snap Hoops – Eileen's Machine Embroidery Blog on March 31, 2020